Hitachi CB 520H A1 - Page 324

No. Item Description
Default
Value
Supported
LPAR
manager
Version
[All LPAR manager firmware versions]
All LPAR: Adjusts the times of all LPARs.
LPAR name: Adjusts the times of the
specified LPAR.
(12) Select
Setting
Display
Select the NTP configuration item.
Setting: Displays Import Config and
TimeSync
NTP: Displays NTP Server configuration
Setting 01-0X~
(13) Import
Config
Select Import configuration for NTP.
None: None import for NTP configuration
SVP: Import SVP's value and TimeZone for
NTP configuration
BMC: Import BMC's value and TimeZone
for NTP configuration
None 01-0X~
(14) TimeSync Select NTP Server configuration for time
synchronization.
Disable: Does not synchronize time to NTP
server
NTP: Synchronize time to NTP Server 1,2
SVP: Synchronize time to SVP
- Interval of time synchronization is 15
minutes (fixed value).
Disable 01-0X~
(15) NTP Server
1,2
Configure IP addresses of NTP Servers.
- This item is valid only when "(14)
TimeSync" is "NTP".
- NTP Servers have to be based on NTP
Version 3 or 4.
None 01-0X~
(16) Function
Key
Displays function keys available on this
screen.
F6: Changes the LPAR manager system
time.
F7: Changes the LPAR manager system
time zone.
- 01-0X~
The following table describes LPAR manager screen operations to each LPAR
status.
7-86
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide