Figure 7-59 Setting of the time zone
• Place the cursor on Setting on the Date and Time screen and press Enter
to display a sub-screen. Select "NTP" and press Enter.
Figure 7-60 Selecting of the NTP
• Set an IP address of NTP servers on the Date and Time screen
Figure 7-61 Setting the IP Address of NTP Server
• Place the cursor on NTP on the Date and Time screen and press Enter to
display a sub-screen. Select "Setting" and press Enter.
Figure 7-62 Selecting of the setting
• Place the cursor on TimeSync on the Date and Time screen and press
Enter to display a sub-screen. Select "NTP" and press Enter.
7-100
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
