No. Item Description
Default
Value
Supported
LPAR
manager
Version
Displays "---" when the LPAR is in the
dedicated mode.
(12) PC Displays the enabled/disabled status of the
Processor Capping function as configured in
the LPAR Configuration screen.
Y: Processor Capping is enabled in shared
mode.
N: Processor Capping is disabled in shared
mode.
*: Processor Capping is ignored in
dedicated mode.
-: The LPAR has not been activated.
- 01-0X~
(13) Sampling
time
Sets the refresh rate of the screen in units
of seconds.
The default setting is 5 seconds, but this
can be changed to anything between 1 and
60.
5 01-0X~
(14) Proc Displays the number of physical processors
assigned to the dedicated mode and the
shared mode.
--- 01-0X~
D: The number of physical processors
assigned to the LPAR in the dedicated
mode.
Format is n or m.
n: Total number of physical processors
assigned to the LPAR running properly in
the dedicated mode
m: Total number of all processors assigned
to LPAR in the dedicated mode.
S: The number of physical processors
assigned to the LPAR in the shared mode.
Format is n or m.
n: Total number of physical processors
assigned to the LPAR running properly in
the shared mode
m: Total number of all processors assigned
to LPAR in the shared mode.
(S: = total number of physical processors –
total number of physical processors
assigned to the dedicated mode LPARs)
(15) Grp Selects processor groups to display.
All: Displays the entire system
The number of a processor group: Displays
specified
All 01-0X~
Operation by LPAR manager Screen
7-121
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
