Figure 7-86 LP system logs Screen
The following table describes each item on this screen.
Table 7-38 Details of the LP system logs Screen
No. Item Description
Default
Value
Supported
LPAR
manager
Version
(1) Select
Level
Specifies the level of the LP System Logs to
display. The initial setting is for all levels
(All level) to be displayed.
Error: displays errors. If you select this
item, "Error only" will be displayed.
Error/Warn: Displays warnings and more
serious problems. If you select this item,
"Over warning" will be displayed.
Error/Warn/Info: displays all logs. If you
select this item, "All level" will be
displayed.
All level 01-0X~
(2) Pages Displays the system log page information.
Numerator: Displays the page number of
the system log currently displayed.
Denominator: Displays the total number of
pages of the system logs.
This item is displayed when the system log
of two pages or more is retained.
- 01-0X~
(3) Level Displays the level of the LP System Logs.
Error: Indicates an error.
- 01-0X~
Operation by LPAR manager Screen
7-129
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
