Hitachi CB 520H A1 User Manual

Message Content Target LPAR is active.
Explanation The LPAR for which you tried to make a setting is active, so you
cannot make any settings now.
LPAR manager
operation
Aborts the specified process.
What to do Make the setting again after the LPAR has been deactivated.
Message Content Target LPAR is coming to foreground.
Explanation Now switching to the LPAR guest screen.
LPAR manager
operation
Continues the specified processing.
What to do Wait for a while.
Message Content Target LPAR is deactivate.
Explanation The LPAR you tried to deactivate is already deactivated.
LPAR manager
operation
Aborts the service ratio setting.
What to do Try again after activating the LPAR.
Message Content Target LPAR is Executing Migration.
Explanation Operation to the LPAR you tried to operate is not allowed due to
LPAR migration in progress.
LPAR manager
operation
Aborts the specified process Cancel the specified operating.
What to do Retry the specified process until the LPAR migration is completed.
Message Content Target LPAR is Executing Rollback.
Explanation Operation to the LPAR you tried to operate is not allowed due to
the roll back by LPAR migration in progress.
LPAR manager
operation
Aborts the specified process.
What to do Retry the specified process until the LPAR migration is completed.
Message Content Target LPAR is undefined.
Explanation The LPAR you tried to manipulate is undefined.
When you tried to change the configuration information of a
virtual NIC, you tried to change an undefined LPAR.
LPAR manager
operation
Aborts the specified process.
What to do Retry the specified process.
Messages
9-23
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Hitachi CB 520H A1 Specifications

General

Brand	Hitachi
Model	CB 520H A1
Category	Server
Language	English