Hitachi CB 520H A1 - Page 437

ID Message
Operation for which an audit log is
collected
01003010
"Requested to set the IP address of
BSM1. Accept:xxx Value:xxx"
When HvmSh and so on is used to request
change of the BSM1 IP address and the
request is accepted
01003012
"Set the IP address of BSM1.
Value:xxx"
When the LPAR manager screen is used to
request change of the BSM1 IP address and
the request succeeds
01003013
"Failed to set the IP address of BSM1.
Value:xxx"
When the LPAR manager screen is used to
request change of the BSM1 IP address and
the request fails
01003014
"Requested to set the IP address of
BSM2. Accept:xxx Value:xxx"
When HvmSh and so on is used to request
change of the BSM2 IP address and the
request is accepted
01003016
"Set the IP address of BSM2.
Value:xxx"
When the LPAR manager screen is used to
request change of the BSM2 IP address and
the request succeeds
01003017
"Failed to set the IP address of BSM2.
Value:xxx"
When the LPAR manager screen is used to
request change of the BSM2 IP address and
the request fails
01003018
"Requested to set the IP address of
BSM3. Accept:xxx Value:xxx"
When HvmSh and so on is used to request
change of the BSM3 IP address and the
request is accepted
0100301A
"Set the IP address of BSM3.
Value:xxx"
When the LPAR manager screen is used to
request change of the BSM3 IP address and
the request succeeds
0100301B
"Failed to set the IP address of BSM3.
Value:xxx"
When the LPAR manager screen is used to
request change of the BSM3 IP address and
the request fails
0100301C
"Requested to set the IP address of
BSM4. Accept:xxx Value:xxx"
When HvmSh and so on is used to request
change of the BSM4 IP address and the
request is accepted
0100301E
"Set the IP address of BSM4.
Value:xxx"
When the LPAR manager screen is used to
request change of the BSM4 IP address and
the request succeeds
0100301F
"Failed to set the IP address of BSM4.
Value:xxx"
When the LPAR manager screen is used to
request change of the BSM4 IP address and
the request fails
01003020
"Requested to set the BSM1 alert port.
Accept:xxx Value:xxx"
When HvmSh and so on is used to request
change of the BSM1 alert port and the
request is accepted
01003022 "Set the BSM1 alert port. Value:xxx" When the LPAR manager screen is used to
request change of the BSM1 alert port and
the request succeeds
01003023
"Failed to set the BSM1 alert port.
Value:xxx"
When the LPAR manager screen is used to
request change of the BSM1 alert port and
the request fails
Messages
9-61
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide