ID Message
Operation for which an audit log is
collected
01003061 "Failed to remove the LPAR. LPARxxx" When the LPAR manager screen is used to
request deletion of an LPAR and the request
fails
01003062 "Added the LPAR. LPARxxx" When HvmSh and so on is used to request
addition of an LPAR and the request
immediately succeeds
01003064 "Added the LPAR. LPARxxx" When the LPAR manager screen is used to
request addition of an LPAR and the request
succeeds
01003065 "Failed to add the LPAR. LPARxxx" When the LPAR manager screen is used to
request addition of an LPAR and the request
fails
01003066 "Set the name for the LPAR. LPAR#:xxx
Value:xxx"
When HvmSh and so on is used to request
change of the LPAR name and the request
immediately succeeds
01003068 "Set the name for the LPAR. LPAR#:xxx
Value:xxx"
When the LPAR manager screen is used to
request change of the LPAR name and the
request succeeds
01003069
"Failed to set the name for the LPAR.
LPAR#:xxx Value:xxx"
When the LPAR manager screen is used to
request change of the LPAR name and the
request fails
0100306A
"Set the scheduling mode for the LPAR.
LPARxxx Value:xxx"
When HvmSh and so on is used to request
change of the scheduling mode of logical
processors for an LPAR and the request
immediately succeeds
0100306C
"Set the service ratio for the LPAR.
LPARxxx Value:xxx"
When HvmSh and so on is used to request
change of the service ratio of an LPAR and
the request immediately succeeds
0100306E
"Set the service ratio for the LPAR.
LPARxxx Value:xxx"
When the LPAR manager screen is used to
request change of the service ratio of an
LPAR and the request succeeds
0100306F
"Failed to set the service ratio for
the LPAR. LPARxxx Value:xxx"
When the LPAR manager screen is used to
request change of the service ratio of an
LPAR and the request fails
01003070
"Set the memory size for the LPAR.
LPARxxx Value:xxx"
When HvmSh and so on is used to request
change of the memory size for an LPAR with
its guest NUMA disabled and the request
immediately succeeds
01003072
"Set the memory size for the LPAR.
LPARxxx Value:xxx"
When the LPAR manager screen is used to
request change of the memory size for an
LPAR with its guest NUMA disabled and the
request succeeds
01003073
"Failed to set the memory size for the
LPAR. LPARxxx Value:xxx"
When the LPAR manager screen is used to
request change of the memory size for an
LPAR with its guest NUMA disabled and the
request fails
Messages
9-65
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
