ID Message
Operation for which an audit log is
collected
manager system time or the UTC time.
Accept:xxx LPARxxx TimeSource:xxx"
time and the LPAR SEL time with the LPAR
manager system time or the UTC time. and
the request is accepted
0100312E
"Adjusted the RTC time and the SEL
time for the LPAR to the LPAR manager
system time or the UTC time. LPARxxx
TimeSource:xxx"
When the LPAR manager screen is used to
request the process for synchronizing the
LPAR RTC time and the LPAR SEL time with
the LPAR manager system time or the UTC
time. and the request succeeds
0100312F
"Failed to adjust the RTC time and the
SEL time for the LPAR to the LPAR
manager system time or the UTC time.
LPARxxx TimeSource:xxx"
When the LPAR manager screen is used to
request the process for synchronizing the
LPAR RTC time and the LPAR SEL time with
the LPAR manager system time or the UTC
time. and the request fails
01003130
"Requested to adjust the RTC time and
the SEL time for the LPAR to the LPAR
manager system time in the specified
time zone. Accept:xxx LPARxxx
TimeZone:xxx"
When HvmSh and so on is used to request
the process for synchronizing the LPAR RTC
time and the LPAR SEL time with the LPAR
manager system time and specifying the
TimeZone and the request is accepted
01003132
"Adjusted the RTC time and the SEL
time for the LPAR to the LPAR manager
system time in the specified time
zone. LPARxxx TimeZone:xxx"
When the LPAR manager screen is used to
request the process for synchronizing the
LPAR RTC time and the LPAR SEL time with
the LPAR manager system time and
specifying the TimeZone and the request
succeeds
01003133
"Failed to adjust the RTC time and the
SEL time for the LPAR to the LPAR
manager system time in the specified
time zone. LPARxxx TimeZone:xxx"
When the LPAR manager screen is used to
request the process for synchronizing the
LPAR RTC time and the LPAR SEL time with
the LPAR manager system time and
specifying the TimeZone and the request fails
01003134
"Requested to adjust the RTC time and
the SEL time for all LPARs to the LPAR
manager system time or the UTC time.
Accept:xxx TimeSource:xxx"
When HvmSh and so on is used to request
the process for synchronizing all of the LPAR
RTC times and the LPAR SEL times with the
LPAR manager system time or the UTC time
and the request is accepted
01003136
"Adjusted the RTC time and the SEL
time for all LPARs to the LPAR manager
system time or the UTC time.
TimeSource:xxx"
When the LPAR manager screen is used to
request the process for synchronizing all of
the LPAR RTC times and the LPAR SEL times
with the LPAR manager system time or the
UTC time and the request succeeds
01003137
"Failed to adjust the RTC time and the
SEL time for all LPARs to the LPAR
manager system time or the UTC time.
TimeSource:xxx"
When the LPAR manager screen is used to
request the process for synchronizing all of
the LPAR RTC times and the LPAR SEL times
with the LPAR manager system time or the
UTC time and the request fails
01003138
"Requested to adjust the RTC time and
the SEL time for all LPARs to the LPAR
manager system time in the specified
time zone. Accept:xxx TimeZone:xxx"
When HvmSh and so on is used to request
process for synchronizing all of the LPAR RTC
times and the LPAR SEL times with the LPAR
manager system time and specifying the
TimeZone and the request is accepted
9-76
Messages
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
