Hitachi CB 520H A1 User Manual

ID Message
Operation for which an audit log is
collected
010032BA
"Requested to set the authentication
method of RADIUS server2. Accept:xxx
Value:xxx"
When HvmSh and so on is used to request
change of the authentication method of
RADIUS server2 and the request is accepted
010032BC
"Requested to set the authentication
method of RADIUS server3. Accept:xxx
Value:xxx"
When HvmSh and so on is used to request
change of the authentication method of
RADIUS server3 and the request is accepted
010032BE
"Requested to set the common role for
the RADIUS authentication users.
Accept:xxx Rolexxx"
When HvmSh and so on is used to request
change of a role for all users authenticated
by a RADIUS server and the request is
accepted
010032C0
"Requested to set the security
permission for the user-defined role.
Accept:xxx Rolexxx Value:xxx"
When HvmSh and so on is used to request
change of a security permission for a users-
defined role and the request is accepted
010032C2
"Requested to assign the role to the
local user. Accept:xxx User:xxx
Rolexxx"
When HvmSh and so on is used to request
change of a role for local users and the
request is accepted
010032C4
"Requested to assign the role of
ManagementModuleUser. Accept:xxx
Rolexxx"
When HvmSh and so on is used to request
change of a role for the management module
user and the request is accepted
010032D4
"Completed the LPAR migration.
Position:xxx Method:xxx SrcLP:xxx
SrcLPAR#:xxx LPAR_Name:xxx DstLP:xxx
DstLPAR#:xxx"
When a migration execution succeeds
010032D8
"Completed the LPAR migration
recovery. LPARxxx"
When a recovery operation of LPAR migration
succeeds
010032DA
"Applied all pending changes to the
LPAR manager."
"When the LPAR manager screen is used to
request reflection of change with Update PCI
Dev Schd or Update System Config and the
request succeeds"
010032DB
"Failed to apply all pending changes
to the LPAR manager."
"When the LPAR manager screen is used to
request reflection of change with Update PCI
Dev Schd or Update System Config and the
request fails"
010032DC
"Canceled all pending changes to the
LPAR manager."
When the LPAR manager screen is used to
request cancel of change with Update PCI
Dev Schd or Update System Config and the
request succeeds
010032DD
"Failed to cancel all pending changes
to the LPAR manager."
When the LPAR manager screen is used to
request cancel of change with Update PCI
Dev Schd or Update System Config and the
request fails
010032DE
"Requested to set the L3_CBM for the
LPAR. Accept:xxx LPARxxx Value:xxx"
When HvmSh and so on is used to request
change of L3_CBM for an LPAR and the
request is accepted
Messages
9-91
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Hitachi CB 520H A1 Specifications

General

Brand	Hitachi
Model	CB 520H A1
Category	Server
Language	English