ID Level Message
Description and Action
0xFCA4 Warning Migration failed on the destination LP.
(SIP=<X>,DIP=<Y>,RC=<Z>)
[Description] LPAR migration failed on the destination LP. <X> is the IP address on the
migration source LP; <Y> is the IP address on the migration destination LP; <Z> is the
error reason code.
[Action] Take actions following HCSM messages shown during LPAR migration task in
operation.
0xFC78 Information LPAR <X>, Sent information update alert.
[Description] LPAR <X> information is updated. <X> is the LPAR number.
[Action] None.
0xFC79 Information LPAR <X>, Sent information update alert (add).
[Description] LPAR <X> is added. <X> is the LPAR number.
[Action] None.
0xFC7A Information LPAR <X>, Sent information update alert (remove).
[Description] LPAR <X> is removed. <X> is the LPAR number.
[Action] None.
0xFC03 Information LP configuration format has been changed. (Previous
Ver.=<X>,New Ver.=<Y>)
[Description] LP configuration format has been changed. <X> is the configuration format
version before change; <Y> is the configuration format version after change.
[Action] None.
0xFC02 Information LP configuration was saved. (RC=<X>)
[Description] LP configuration was saved. <X> is the trigger for saving.
[Action] None.
0xFC01 Information LP started to shut down.
[Description] LP started shutdown.
[Action] None.
0xFC00 Information LP boot has completed.
[Description] LP boot has completed.
[Action] None.
9-96
Messages
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
Need help?
General