item Setting items Description default
Support
Version
VC Sets whether to perform user
authentication when connecting to
the guest screen.
Disable 02-05 or
later
LP CLI Sets whether to perform user
authentication when performing
connection by using the LP CLI.
Disable 02-05 or
later
Expiry Sets the password expiration
date.
0 02-05 or
later
Type Sets the virtual COM console
connection method.
Telnet 02-05 or
later
SYS2 Processors Set the upper limit of the number
of the physical processors used by
SYS2.
2 02-62 or
later
LPAR
manager
Screen
Date and
Time
Select Display Selects a time display. LPAR RTC 01-0X or
later
System Time Zone Sets a time zone of LPAR
manager System.
+ 0:00 01-0X or
later
TimeSync Select a time synchronous setup
by a NTP server.
*recommends making a setup
which performs matching the time
by a management module.
Disable 01-0X or
later
LPAR
manager
Screen
LP Options
Pre-State Auto Activation Sets a Yes for restoring LPAR to
same condition as previous LPAR
before rebooting LPAR manager
by accident.
No 01-0X or
later
LP Auto Shutdown Sets a Yes for shutting down
when all LPARs are in deactivated
status.
No 01-0X or
later
LP ErrorWatching Sets a Yes for detecting a hung-
up state.
Yes 01-0X or
later
PhyCPU C-State (>= C3) Sets an Enable when a save
electric power function enables.
Enable 01-0X or
later
USB Auto Allocation to LPAR Sets an Enable if you want to
enable USB-Automatic-Attach
when LPAR is activated /
reactivated.
Enable 01-0X or
later
Save changed Config
Format
Sets an Enable to enable the
configuration
Information auto save function.
Disable 01-0X or
later
LP Timercounter Base Specifies the base for
TimerCounter.
*LP TimerCounter Base is
displayed when the timer
TSC 01-3X or
later
B-4
Setting Item List
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
