Hitachi CB 520H A1 - Page 525

item Setting items Description default
Support
Version
Do not change the value of this
setting from the default value.
Guest NUMA (NUMA) Sets Y to use the guest NUMA.
It is possible to set this setting
when the NUMA setting is enabled
for the EFI.
N 02-0X or
later
Partition Reference Time
Enlightenment (PRTE)
Sets Y to use PRTE. N 02-25 or
later
LPAR
manager
Screen
Logical
Processor
Configuration
Logical Processor
Assignment
Sets an assignment of a physical
processor to a logical processor.
A 01-0X or
later
LPAR
manager
Screen
Physical
Processor
Configuration
Processor Group
Configuration
Sets a Processor group number 0 01-0X or
later
LPAR
manager
Screen
PCI Device
Assignment
Scheduling Mode (Schd) Sets Shared mode or Dedicated
mode
S 01-0X or
later
PCI Device Assignment Sets an assignment of PCI Device. - 01-0X or
later
LPAR
manager
Screen
Virtual NIC
Assignment
VNIC Assignment Sets Logical NIC. *(non-
assign)
01-0X or
later
Promiscuous Mode Sets a promiscuous mode. T (Shared
NIC/Virtual
NIC)
R (VF NIC)
01-0X or
later
VLAN mode Sets a VLAN mode. *(non-
assign)
01-0X or
later
Inter-LPAR Packet Filtering Sets between-LPARs
communication packet filter.
Disable 01-0X or
later
TXRATE Sets a limited transmission
bandwidth of VF NIC.
10000Mbps 01-9X or
later
LPAR
manager
Screen
Shared FC
Assignment
Shared FC Assignment Sets an assignment of Shared-FC-
Port
*(non-
assign)
01-0X or
later
Setting Item List
B-7
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide