Item
Protoc
ol
Port Number
Direction of
Communication
(LPAR manager-
Management
Server)
Description Note
LP Web System TCP 443 <- Logical VGA
Snap Shot
HTTPS
HvmSh UDP 623 <- HCSM HVM
Navigator,
HvmSh
Command,
etc.
RMCP
TCP 23250,
20670
<-
HvmGetPerf UDP 623 <- HvmGetPerf
Command
RMCP
Guest memory
dump collection
command and
LPAR manager
dump collection
command
TCP 20, 21 -> Get Dump FTP
DNS UDP 53 -> Name
retrieval
-
Syslog UDP 6514 (specifiable
values: 1 to
65535)
-> Acquisition
of audit logs
-
TCP
TLS
LDAP TCP 389 (specifiable
values: 1 to
65535)
-> LDAP
authenticati
on
-
RADIUS UDP 1812 (specifiable
values: 1 to
65535)
-> RADIUS
authenticati
on
-
Notes:
1. If the virtual COM console connection method is "Telnet for which user
authentication is enabled" or "ssh", the values that can be set are 1024 to 65504.
Table D-2 LPAR manager use port numbers
Item Protocol Port Number
Direction of
Communication
(LPAR
manager-
Management
module)
Description
Communication
between
management
modules
TCP [LPAR manager
firmware version
02-20 or earlier]
25101, 25102
-> Heat beat between
management
modules, N+M cold
standby, Saving
configuration
LPAR manager use Port numbers
D-3
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
