Output item Description Type option
LPAR manager
system
operation
information
Indicates the operating status of the LPAR manager
system. It shows execution times and busy ratios for
all LPARs and LPAR manager system as well as the
numbers of shared and dedicated CPUs assigned.
all host
Physical
processor
operation
information
Indicates the operating status of the physical
processors mounted in the LPAR manager system. It
shows the busy ratio and the mounting location of
each processor.
all pcpu
LPAR operation
information
Indicates the number of LPARs defined and settings
and operating status for each defined LPAR. The LPAR
Count line at the top displays the number of LPARs
defined. As definition information for each LPAR, the
LPAR number, number of shared CPUs (Shr), number
of dedicated CPUs (Ded) and LPAR name (ID) are
output. As operation information for each LPAR, the
same information as that shown in the LPAR Usage
screen is displayed for SrvRatio, Srv(%), Dsp(ms),
Busy(%), Dsp(%) and PC. For each logical CPU
defined for each LPAR, the logical CPU number,
whether it is dedicated or shared (Shr or the number
of the physical processor occupying it), LPAR manager
execution time (Hyper), running wait time (Ready)
and LPAR execution time (Used) are output. If the -
lpar option specifies LPAR, the command outputs
information only for the specified LPAR. If the -lpar
option is omitted, the command outputs information
for all LPARs defined. For inactive LPARs, the
corresponding information field shows "---" and does
not show information for each logical CPU.
all lpar
The summary format output shows information equivalent to that shown in
the LPAR Usage screen. For details of data, see also description in "LPAR
Usage".
Output in text format
The following figure shows an example output in text format.
F-4
HvmGetPerf Command
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
Need help?
General