Error message and
termination code
Description Action
whether other machines are
executing the HvmGetPerf
command simultaneously. Only
up to four devices can connect to
the LPAR manager
simultaneously.
Cannot Write File or Given
Too Long File Name.
0x01040000
Failed to write data to a
file.
Check that the specified file is
write-. Alternatively, shorten the
length of the filename.
Target LPAR is undefined.
0x04000000
The specified LPAR is not
defined.
When using the lpar option,
specify only a defined LPAR.
Unexpected Exception was
raised.
0xffffffff
An internal error has
occurred.
Check the command options,
network conditions and the
operating status of the specified
LPAR manager.
Invalid Command
Received.
0x000000c1
The target host failed to
accept the HvmGetPerf
command.
Check whether the LP IP address
is specified correctly.
F-8
HvmGetPerf Command
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
Need help?
General