EasyManuals Logo

Hitachi CP-X9110 Network Guide

Hitachi CP-X9110
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
41
3.1 Projector Web Control - Network Settings (continued)
3. Web Control
Item Description
Wireless Setup Congures the wireless LAN settings.
Mode Select "Ad Hoc" or "Infrastructure".
,3&RQ¿JXUDWLRQ Congures network settings.
DHCP ON Enables DHCP.
DHCP OFF Disables DHCP.
IP Address Congures the IP address when DHCP is disabled.
Subnet Mask Congures the subnet mask when DHCP is disabled.
Default
Gateway
Congures the default gateway when DHCP is disabled.
DNS Server Address Congures the DNS server address.
Ch
Select from “1” to “11”, a channel to use in the Ad Hoc mode.
Encryption Lock
Permits or inhibits changes of the following settings related to
wireless connection.
䡡㻌
Mode
䡡㻌
Encryption
䡡㻌
Encryption key (WEP key, WPA passphrase)
䡡㻌
SSID
When Encryption Lock is set to ON, these settings cannot be
changed by the menu of the projector.
Encryption Select data encryption method.
(continued on next page)
• The channels may vary depending on the
country. In addition, depending on the country or region,
it may be required to use a wireless network card that
conforms to the standards in the respective country or
region.
NOTE
If Encryption Lock is ON, wireless connection is
performed only when it can be connected without changing
the current settings.
NOTE

Other manuals for Hitachi CP-X9110

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi CP-X9110 and is the answer not in the manual?

Hitachi CP-X9110 Specifications

General IconGeneral
BrandHitachi
ModelCP-X9110
CategoryProjector
LanguageEnglish

Related product manuals