Hitachi E-Compact Medium Power Series - Page 43

43 | 106
E-Compact Medium Power
ALARM
ALARM DESCRIPTION
PA__ Failure
VGS (Voltage Gate Source) of the indicated PA is less than
2/3 of the programmed VGS.
Default system action: Shutdown.
PA__ Comm Failure
No communication with the indicated PA.
Driver Low Gain
Gain in the driver is less than 30dB.
Default system action: Notification
Driver Low Voltage
Voltage in the driver is less than 5.0V of programmed.
Default system action: Notification
Driver Critical High Current
Consumption current in the driver is greater than 4.9A.
Default system action: Shutdown.
Driver High Current
Consumption current in the driver is between 4.5A and 4.9A.
Default system action: Notification
Driver Low Current
Consumption current in the driver is less than 0.4A.
Default system action: Notification
Driver High Temperature
Temperature Driver is greater than 75°C (167ºF).
Default system action: Notification
Driver High Output Power
Output Power Driver is greater than 46dBm.
Default system action: Notification
Driver Comm Failure
No communication with the Driver.
Pre-Driver Low Current
Consumption current in the pre-driver is less than 0.1A.
Default system action: Notification
Pre-Driver High Current
Consumption current in the pre-driver is greater than 0.35A.
Default system action: Notification
PSU __ High AC Line Voltage
AC Voltage at PSU is greater than 240Vac
Default system action: Notification
PSU __ Critical High AC Line
Voltage
AC Voltage at PSU is greater than 250Vac
Default system action: Shutdown