Hitachi Advanced Server HA820 G2 User Guide 141
4.
Power up the server.
a.
Connect the power cords (rack and tower servers).
b.
Press the Power On/Standby button.
Enabling the Trusted Platform Module
When enabling the Trusted Platform module, observe the following guidelines:
•
By default, the Trusted Platform Module is enabled as TPM 2.0 when the server is powered on
after installing it.
•
In UEFI Boot Mode, the Trusted Platform Module can be configured to operate as TPM 2.0
(default) or TPM 1.2.
•
In Legacy Boot Mode, the Trusted Platform Module configuration can be changed between TPM
1.2 and TPM 2.0
(default), but only TPM 1.2 operation is supported.
To Next Page
Loading...
