L200 Inverter
Inverter Mounting
and Installation
2–11
Check Inverter Dimensions
Step 4: Locate the applicable drawing on the following pages for your inverter.
Dimensions are given in millimeters (inches) format.
NOTE: Some inverter housings require two mounting screws, while others require four.
Be sure to use lock washers or other means to ensure screws do not loosen due to
vibration.
4
5(0.20)
6(0.24)
110(4.33)
120(4.72)
67(2.64)
80(3.15)
5(0.20)
2.6(0.10)
7(0.28)
93(3.66), -002xxx models
107(4.21), -004xxx models
130(5.12), -005xxx models
L200–002NFEF, –002NFU, –004NFEF, –004NFU, –005NFEF
To Next Page
Loading...
