Hitachi SJ700-4000HFU2

Chapter 8 List of Data Settings
8-3
8.4 Extended Function Mode
Code
Function name
Monitored data or setting
Default
Memo
Change during
RUN operation
Page
FF
FEF
FUF
b031≠10
b031=10
Basic settings
A001
Frequency source setting
00 (keypad potentiometer) (*1), 01 (control circuit terminal block),
02 (digital operator), 03 (RS485), 04 (option 1), 05 (option 2),
06 (pulse-string input), 07 (easy sequence),
10 (operation function result)
02
01
01
Not
Not
4-8
A002
Run command source setting
01 (control circuit terminal block), 02 (digital operator), 03 (RS485),
04 (option 1), 05 (option 2)
02
01
01
Not
Not
4-8
A003
Base frequency setting
30. to "Maximum frequency " (Hz)
60.
50.
60.
Not
Not
4-11
A203
Base frequency setting, 2nd motor
30. to "Maximum frequency, 2nd motor" (Hz)
60.
50.
60.
Not
Not
A303
Base frequency setting, 3rd motor
30. to "Maximum frequency, 3rd motor" (Hz)
60.
50.
60.
Not
Not
A004
Maximum frequency setting
"Base frequency setting " to 400. (Hz)
60.
50.
60.
Not
Not
4-11
A204
Maximum frequency setting, 2nd motor
"Base frequency setting, 2nd motor " to 400. (Hz)
60.
50.
60.
Not
Not
A304
Maximum frequency setting, 3rd motor
"Base frequency setting, 3rd motor " to 400. (Hz)
60.
50.
60.
Not
Not
Analog input and others
A005
[AT] selection
00 (switching between O and OI terminals),
01 (switching between O and O2 terminals),
02 (switching between O terminal and keypad potentiometer) (*1),
03 (switching between OI terminal and keypad potentiometer) (*1),
04 (switching between O2 and keypad potentiometer) (*1)
00
Not
Not
4-12
A006
[O2] selection
00 (single),
01 (auxiliary frequency input via O and OI terminals) (nonreversible),
02 (auxiliary frequency input via O and OI terminals) (reversible),
03 disabling O2 terminal)
03
Not
Not
A011
[O]-[L] input active range start frequency
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.00
Not
Allowed
4-14
A012
[O]-[L] input active range end frequency
0.00 to 99.99, 100.0 to 400.0 (Hz)
(In case of setting 0.00, internal setting is "Maximum frequency ")
0.00
Not
Allowed
A013
[O]-[L] input active range start voltage
0. to "[O]-[L] input active range end voltage" (%)
0.
Not
Allowed
A014
[O]-[L] input active range end voltage
"[O]-[L] input active range start voltage" to 100. (%)
100.
Not
Allowed
A015
[O]-[L] input active range start frequency
selection
00 (external start frequency), 01 (0 Hz)
01
Not
Allowed
A016
External frequency filter time const.
1. to 30. or 31. (500 ms filter ±0.1 Hz with hysteresis)
31.
Not
Allowed
4-15
A017
Easy sequence function selection
00 (disabling), 01 (enabling)
00
Not
Not
4-95
Multispeed operation and jogging
A019
Multispeed operation selection
00 (binary: 16 speeds selectable with 4 terminals),
01 (bit: 8 speeds selectable with 7 terminals)
00
Not
Not
4-47
A020
Multispeed frequency setting
0.0 or “start frequency” to “maximum frequency” (Hz)
0.00
Allowed
Allowed
A220
Multispeed frequency setting, 2nd motor
0.0 or “start frequency” to “maximum frequency, 2nd motor” (Hz)
0.00
Allowed
Allowed
A320
Multispeed frequency setting, 3rd motor
0.0 or “start frequency” to “maximum frequency, 3rd motor” (Hz)
0.00
Allowed
Allowed
A021
Multispeed 1 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A022
Multispeed 2 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A023
Multispeed 3 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A024
Multispeed 4 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A025
Multispeed 5 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A026
Multispeed 6 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A027
Multispeed 7 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A028
Multispeed 8 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A029
Multispeed 9 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A030
Multispeed 10 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A031
Multispeed 11 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A032
Multispeed 12 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A033
Multispeed 13 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A034
Multispeed 14 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A035
Multispeed 15 setting
0.0 or “start frequency” to “1st maximum frequency” (Hz) (n=1 to 3)
0.00
Allowed
Allowed
A038
Jog frequency setting
"Start frequency" to 9.99 (Hz)
1.00
Allowed
Allowed
4-49
A039
Jog stop mode
00 (free-running after jogging stops [disabled during operation]),
01 (deceleration and stop after jogging stops [disabled during operation]),
02 (DC braking after jogging stops [disabled during operation]),
03 (free-running after jogging stops [enabled during operation]),
04 (deceleration and stop after jogging stops [enabled during operation]),
05 (DC braking after jogging stops [enabled during operation])
00
Not
Allowed
*1 This setting is valid only when the OPE-SR is connected.