Hitachi SJ700-4000HFU2

Chapter 3 Operation
3-5
(1) Example of operation in full display mode ("b037" = "00" [factory setting])
All parameters can be displayed in full display mode. The display sequence of parameters matches their sequence
shown in Chapter 8, "List of Data Settings."
Key operation and
transition of codes on
display (in monitor or
function mode)
Key operation and
transition of monitored
data on display (in monitor
or function mode)
Key operation and
transition of codes on
display (in extended
function mode)
Key operation and
transition of monitored
data on display (in
extended function mode)
1
2
1
2
Pressing the or key respectively scrolls up or down the code displayed in code display mode or
increases or decreases the numerical data displayed in data display mode.
Press the or key until the desired code or numerical data is shown. To scroll codes or increase/decrease
numerical data fast, press and hold the key.
FUNC
Monitor
mode
(Monitor
display)
(*1)
(Data display)
(*1) (*2)
Function
mode
or
FUNC
STR
FUNC
FUNC
FUNC
FUNC
FUNC
or
FUNC
STR
or
FUNC
STR
or
FUNC
STR
or
FUNC
STR
or
FUNC
STR
or
FUNC
STR
or
FUNC
STR
FUNC
Extended
function
mode A
For the display and key
operation in extended
function mode U, see the
next page.
(*1) (*2)
(Data display)
Extended
function
mode B
Extended
function
mode C
Extended
function
mode H
Extended
function
mode P
or
FUNC
STR
FUNC
FUNC
STR
*1 The content of the display varies depending on
the parameter type.
*2 To update numerical data, be sure to press the
key after changing the data.