Syslog le format (RFC3164-compliant)
Item 29 and 30 are output either one of them in one syslog information.
No. Item Description
1 Priority The priority of an item in the syslog le is determined
according to the following formula, enclosed by brackets (< >):
Priority = 8 X Facility + Severity
Facility is 1 (xed).
Severity depends on the type of log information:
■
4: Error or Warning. Error means the operation has ended
abnormally. Warning means the operation has partly
ended abnormally or was canceled during the operation.
■
6: Informational. The operation has ended normally.
Syslog
Chapter 1: Failure monitoring
Hitachi Alert Notication Guide for VSP5000 Series 11
To Next Page
Loading...
