Hitachi VSP 5000 Series - SNMP Agent Extension Trap Types; Standard MIB Specifications; Mibs Supported by SNMP Agent

Name Object identifier Type Description
*The object identier for a failure in a storage system processor would be
.1.3.6.1.4.1.116.5.11.4.1.1.6.1.2.
SNMP Agent extension trap types
SNMP Agent extension trap types are set according to the severity. The character strings
following "RaidEventUser" indicate their severity.
The following table describes the SNMP Agent extension trap types.
Specific Trap
Code Trap Description
1 RaidEventUserAcute All operations in a storage system stopped.
2 RaidEventUserSerious Operation in a component where a failure
occurred stopped.
3 RaidEventUserModerate Partial failure.
4 RaidEventUserService Minor failure.
Standard MIB specifications
MIBs supported by SNMP Agent
SNMP Agent supports a limited number of MIBs. If you send a GET request for an object
(MIB) that is not supported, you will receive NoSuchName as a GET RESPONSE.
The following table lists MIBs and indicates whether they are supported.
MIB Supported?
Standard MIB: MIB-II system group Yes
interface group No
at group No
ip group No
icmp group No
SNMP Agent extension trap types
Chapter 7: SNMP supported MIBs
Hitachi Alert Notication Guide for VSP5000 Series 44