Hitachi VSP 5000 Series - Raidexmibtraplisttable

Name Type Description
MIB
value Attribute
dkuHWDrive
::=raidExMibDKUHWEntry(5
)
INTEGE
R
Status of drive. See Note read-only
Note:
The status of each component is a single digit which shows the following:
1: Normal.
2: Acute failure detected.
3: Serious failure detected.
4: Moderate failure detected.
5: Service failure detected.
raidExMibTrapListTable
raidExMibTrapListTable shows the history of the failure traps.
raidExMibTrapListTable OBJECT TYPE
SYNTAX SEQUENCE OF RaidExMibTrapListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Trap list table."
::={ raidExMibRoot 8 }
raidExMibTrapListEntry OBJECT TYPE
SYNTAX RaidExMibTrapListEntry
ACCESS non-accessible
STATUS mandatory
DESCRIPTION "Trap list table index."
INDEX { eventListIndexSerialNumber ,
eventListIndexRecordNo }
::={ raidExMibTrapListTable 1 }
The following table lists the information displayed for each failure.
Name
Type Description MIB value Attribute
eventListIndexSerialNu
mber
INTEGER Storage system
product number
(index).
1 - 99,999 read-only
raidExMibTrapListTable
Chapter 7: SNMP supported MIBs
Hitachi Alert Notication Guide for VSP5000 Series 53