Hitachi VSP 5000 Series - Page 13

No. Item Description
■
AnomalyEvent indicates reached the maximum of the
Audit Log, etc.
■
ExternalService indicates remote maintenance operations
through SVP.
13 Result of audit
event
■
Success: Normal end. The operation has ended normally.
■
Failed: Error (xxxx-yyyy). The operation has ended
abnormally.
■
Failed: Warning (xxxx-yyyy). The operation has partly ended
abnormally or was canceled during the operation.
"xxxx-yyyyy" indicates error codes and it is output only for
Device Manager - Storage Navigator operations.
14 Subject
identication
The user name in the format of "uid=user name".
■
<system> is output when the category name is
AnomalyEvent.
■
<DKCMaintenance> is output for SVP operations.
■
<Host> is output for commands from host.
15 Hardware
identication
The ID (R900) to identify the model name of the product and
the serial number divided by a colon.
16 Generated
location
No output.
17 Related
information
The location identication name set by the user in the Syslog
tab on Edit Audit Log Settings window.
18 No output.
19 No output.
20 Agent
information
No output.
21 Detailed
information
Identication of the host sending the request.
This information is output when a command is received from
the host unless it is FC-SP authentication.
22 No output.
23 No output.
24 No output.
25 Collective operation identier. This is a serial number that
identies those multiple lines displayed by one operation are
the same operation.
Syslog
Chapter 1: Failure monitoring
Hitachi Alert Notication Guide for VSP5000 Series 13