BASIC
Version 1.0, 02/2015. Copyright 2012 Hitron Technologies
59
Version 1.0, 02/2015. Copyright 2014 Hitron Technologies
59
Hitron CGNVM User’s Guide
3.3 The Basic: Gateway Function Screen
Use this screen to enable or disable the CGNVM’s residential gateway and Universal
Plug n Play (UPnP) functions.
Disabling the residential gateway feature sets the unit to use bridge mode only. Use
this mode when your network is already using another router.
Click Basic > Gateway Function. The following screen displays.
Figure 20: The Basic: Gateway Function Screen
The following table describes the labels in this screen.
Status This displays Active when the connected computer is
online, and Inactive when the connected computer is
offline.
Renew Click this to refresh the information in this section.
Table 15: The Basic: Gateway Function Screen
Residential Gateway
function
Select Enabled to enable the CGNVM’s residential
gateway features, or select Disabled to disable them.
UPnP Select Enabled to enable the CGNVM’s Universal Plug
n Play features, or select Disabled to disable them.
Table 14: The Basic: LAN Setup Screen (continued)
To Next Page
Loading...
Need help?
General
