Hitron CGNVM - The Wireless: Basic Settings: 2.4 G Screen

WIRELESS
Version 1.0, 02/2015. Copyright 2012 Hitron Technologies
79
Version 1.0, 02/2015. Copyright 2014 Hitron Technologies
79
Hitron CGNVM User’s Guide
 Use the 2.4GHz network screen to enable 2.4GHz wireless clients to connect to
the CGNVM. See The Wireless: Basic Settings: 2.4G Screen on page 79.
 Use the 5GHz network screen to enable 5GHz wireless clients to connect to the
CGNVM. See The Wireless: Basic Settings: 5G Screen on page 84.
 Use the WPS screen to enable WPS-capable wireless clients to connect to the
CGNVM via a simple push-button, or by entering a password. See The Wireless:
Basic Settings: WPS Screen on page 88.
 Use the Guest Network screen to enable wireless clients to connect to the
CGNVM with reduced privileges. See The Wireless: Basic Settings: Guest
Screen on page 90.
4.2.1 The Wireless: Basic Settings: 2.4G Screen
Use this screen to configure the CGNVM’s 2.4GHz wireless network.
Click Wireless > Basic Settings > 2.4G. The following screen displays.