BASIC
Version 1.0, 02/2015. Copyright 2012 Hitron Technologies
61
Version 1.0, 02/2015. Copyright 2014 Hitron Technologies
61
Hitron CGNVM User’s Guide
Public These fields display the ports to which the rule applies:
The Public field displays the incoming port range.
These are the ports on which the CGNVM received
traffic from the originating host on the WAN.
The Private field displays the port range to which the
CGNVM forwards traffic to the device on the LAN.
Private
Protocol This field displays the protocol or protocols to which this
rule applies:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Transmission Control Protocol and User Datagram
Protocol (TCP/UDP)
Generic Routing Encapsulation (GRE)
Encapsulating Security Protocol (ESP)
Local IP Address This displays the IP address of the computer on the LAN
to which traffic conforming to the Public Port Range
and Protocol conditions is forwarded.
Remote IP Address This displays the IP address of the computer on the
WAN from which traffic conforming to the Public Port
Range and Protocol conditions is forwarded to the
Local IP Address.
Status Use this to turn the port forwarding rule on or off.
Select ON to activate the port forwarding rule.
Select OFF to deactivate the port forwarding rule.
Manage Click this to make changes to the rule.
Action Use this to delete the rule.
Add Rule Click this to define a new port forwarding rule. See
Adding or Editing a Port Forwarding Rule on page 62 for
information on the screen that displays.
Save Changes Click this to save your changes to the fields in this
screen.
Help Click this to see information about the fields in this
screen.
Table 16: The Basic: Port Forwarding Screen (continued)
To Next Page
Loading...
Need help?
General
