Version 1.0, 11/2016. Copyright 2012 Hitron Technologies
103
Version 1.0, 11/2016. Copyright 2016 Hitron Technologies
103
Hitron CODA-4x8x User’s Guide
5.4 The Wireless: ATF Screen
Use this screen to configure AirTime Fairness (ATF) settings. ATF is a wireless
quality-of-service feature that allows you to assign a percentage of the available
wireless resources to each of the CODA-4x8x’s various wireless network SSIDs.
“Airtime”, in this usage, refers to the amount of time required to transmit data over the
wireless network from the CODA-4x8x to its wireless clients. This is distinct from the
actual amount of data transmitted, as different connections may transmit data at
different speeds.
This enables you to, for instance, ensure that usage of the guest network does not
impinge on more important traffic. It also enables you to prevent traffic on slower
SSIDs from affecting the performance of faster ones.
Click Wireless > ATF. The following screen displays.
Figure 38: The Wireless: ATF Screen
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 27: The Wireless: Access Control Screen (continued)
To Next Page
Loading...
Need help?
General
