Version 1.0, 11/2016. Copyright 2012 Hitron Technologies
17
Version 1.0, 11/2016. Copyright 2016 Hitron Technologies
17
Hitron CODA-4x8x User’s Guide
Table 2: Hardware Connections
WPS Press this button to begin the WiFi Protected Setup
(WPS) Push-Button Configuration (PBC) procedure.
Press the PBC button on your wireless clients in the
coverage area within two minutes to enable them to join
the wireless network.
The WPS LED displays WiFi Protected Setup
connection status as follows:
Bi-color, blinking: the WPS connection is
processing.
Green, steady: the WPS connection has been
successful.
Red, steady: the WPS connection has failed, or an
error has occurred.
Off: WPS is not active.
See WPS on page 86 for more information.
USB Use this port to plug in USB flash disks for mounting and
sharing through the LAN interfaces via the Samba
protocol (network neighborhood).
The CODA-4x8x supports the following Windows file
systems:
FAT16
FAT32
USB devices must not drain more than 500mA
from the USB port. USB devices requiring
more than 500mA should be provided with
their own power source(s).
To Next Page
Loading...
Need help?
General
