Version 1.0, 11/2016. Copyright 2012 Hitron Technologies
116
Version 1.0, 11/2016. Copyright 2016 Hitron Technologies
116
Hitron CODA-4x8x User’s Guide
6.8 The Admin: IP Passthrough Screen
Use this screen to assign a public IP address to a device attached to your CODA-
4x8x on the LAN.
NOTE: Before enabling IP passthrough, bear in mind that once IP passthrough is
enabled, you will no longer be able to access the CODA-4x8x’s GUI from the
relevant device on the LAN. You may also require additional configuration to
be performed by your Internet Service Provider on your account. Check
documentation from your ISP, or contact their customer service department, if
unsure.
Click Admin > IP Passthrough. The following screen displays.
Figure 46: The Admin: IP Passthrough Screen
To Next Page
Loading...
Need help?
General
