Version 1.0, 11/2016. Copyright 2012 Hitron Technologies
68
Version 1.0, 11/2016. Copyright 2016 Hitron Technologies
68
Hitron CODA-4x8x User’s Guide
4.3 The Basic: Gateway Function Screen
Use this screen to enable or disable the CODA-4x8x’s residential gateway, Universal
Plug n Play (UPnP) and Session Initiation Protocol Application Layer Gateway (SIP
ALG) functions.
Disabling the residential gateway feature sets the unit to use bridge mode only. Use
this mode when your network is already using another router.
Click Basic > Gateway Function. The following screen displays.
Figure 24: The Basic: Gateway Function Screen
The following table describes the labels in this screen.
Table 15: The Basic: Gateway Function Screen
Residential Gateway
function
Select Enabled to turn on the CODA-4x8x’s residential
gateway features, or select Disabled to turn them off.
UPnP Select Enabled to turn on the CODA-4x8x’s Universal
Plug n Play features, or select Disabled to turn them off.
SIP ALG Select Enabled to turn on the CODA-4x8x’s Session
Initiation Protocol Application Layer Gateway for VoIP,
or select Disabled to turn it off.
Save Changes Click this to save your changes to the fields in this
screen.
To Next Page
Loading...
Need help?
General
