Version 1.0, 11/2016. Copyright 2012 Hitron Technologies
124
Version 1.0, 11/2016. Copyright 2016 Hitron Technologies
124
Hitron CODA-4x8x User’s Guide
The following screen displays.
Figure 49: The Security: Port Blocking Add/Edit Screen
The following table describes the labels in this screen.
Table 39: The Security: Port Blocking Add/Edit Screen
Application Name Enter a name for the application for which you want to
create the rule.
NOTE: This name is arbitrary, and does not affect
functionality in any way.
Protocol Use this field to specify whether the CODA-4x8x should
filter via:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Both TCP and UDP (TCP/UDP).
NOTE: If in doubt, leave this field at its default.
Port Range Use these fields to specify the start and end port for
which this filtering rule applies. These are the ports to
which traffic will be blocked.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.
To Next Page
Loading...
Need help?
General
