Version 1.0, 11/2016. Copyright 2012 Hitron Technologies
142
Version 1.0, 11/2016. Copyright 2016 Hitron Technologies
142
Hitron CODA-4x8x User’s Guide
RIP Receive Version Use this field to control the type of RIP information that
the CODA-4x8x will forward from the specified interface
to devices on the LAN.
Select Do not receive to have the CODA-4x8x not
send RIP information.
Select RIP 1 to receive and forward only RIP
version 1 information.
Select RIP 2 to receive and forward only RIP
version 2 information.
Select RIP 1/2 to receive and forward both RIP
version 1 and version 2 information.
Update interval Enter the number of seconds that should elapse
between transmission of RIP information.
Default Metric Select the metric value to be used for RIP data
redistribution when routing metrics are incompatible.
Table 47: The Advanced: RIP Control Screen (continued)
To Next Page
Loading...
Need help?
General
