Module Description 1-5
© 2005 HMS Industrial Networks AB7607 User manual
Optional Hardware
• A PC with a serial RS232 COM port to be used by the Anybus-X Con-
figuration Tool Software for downloading firmware updates.
• RS232 null-modem cable (pins 2 and 3 swapped) from the PC to the Any-
bus-X module.
• DIN rail to mount the Anybus-X.
Required Software
• DeviceNet configuration software such as RSNetWorx for DeviceNet to
configure DeviceNet devices and Anybus-X’s DeviceNet operation.
RSLinx version 2.31 or later is required.
Optional Software
• Anybus-X Configuration Tool Software to update Anybus-X’s firmware.
To Next Page
Loading...
