Status and Diagnostics 10-6
© 2005 HMS Industrial Networks AB7607 User manual
74 CAN receive overrun error.
75 CAN network failure.
76 Scanner is lonely; it is not receiving any network traffic.
77 Incorrect connection size.
78 No response from the device.
79 CAN transmit failure.
80 In Idle mode.
81 Faulted.
82 DeviceNet fragmentation error.
83 Error during slave connection initialization.
84 Slave connection initialization in progress.
85 Incorrect data size received on connection.
86 Device went into Idle mode.
87 Shared master has not made connection to the device.
88 Shared master has not made the right type of connection to the
device.
89 ADR keeper error.
90 CAN network disabled.
91 CAN bus-off.
92 No DeviceNet power.
95 Flash update in progress.
96 CAN port is in Test mode.
97 Device halted.
98 Firmware failure.
99 System failure.
Status Code Description
Table 10-6 Node Status Codes (Continued)
To Next Page
Loading...
