13
Trapeze
1.
Release the trapeze wires from the base of the mast. The crew’s trapeze has the clamcleat swaged to
the wire. Ensure that the crews trapeze wire is positioned in front of the shroud.
2. Attach the trapeze handles and kits to the trapeze wires.
3. Pass the skipper trapeze shock cords under-
neath the trampoline and up through the grom-
mets at the side of the trampoline. Attach to the
trapeze system as shown in the photographs.
4.. For the crew trapeze, take the shock cord that
comes out of the cross bar and fix to it the end of
the trapeze adjustable rope using a bowline knot.
(see above photo)
To Next Page
Loading...
Need help?
General
