2
Necessary tools :
2 spanners #17
1 pair of universal plier
It is advisable to be at least 2 people to
assemble the Hobie Tiger .
CAUTION - DANGER ALUMINIUM
MAST - STAY AWAY OF
ELECTRICAL WIRES
TABLE OF CONTENT
List of parts ..............................................2
Hull assembly ..........................................4
Trampoline ...............................................5
Rudder assembly .....................................7
Tiller crossbar & stick .............................8
Mast set up ...............................................9
Spreader bars ........................................10
Preparation of the mast 11
Stepping the mast ..................................12
Trapeze ...................................................13
Boom ......................................................14
Mainsail ..................................................15
Cunningham ...........................................16
Mast rotation ..........................................18
Jib furler (option) ...................................19
Fully battened jib (serial) .......................21
Jib sheet self tacking system ................23
Self tacker traveller car control ............24
Main sheet system .................................25
Trumpet Spinnaker (option) ...................27
Before Sailing.........................................32
Safety advice ..........................................33
LIST OF PARTS
Hulls (2)
Front crossbar
Rear crossbar
Mast
Boom
Trampoline
Part bag (wires)
Rigging bag
Ropes bag
Spinnaker rig bag
Rudder assemblies (2)
Tiller crossbar
Tiller extension FX6
Mainsail + battens (7)
Jib
Trampoline lacing rod
Daggerboards (2)
To Next Page
Loading...
Need help?
General
