25
Main sheet system
1.
Your mainsheet system
has been pre-assembled
for you by your Hobie
dealer. If not, see the fol-
lowing page for assembly
instructions.
2.
Shackle the mainsheet ratchet block to the
top of the main traveller car.
3.
Shackle the boom block to the boom block han-
ger.
4.
Thread the tail of the main sheet
through the swivel cleat assy on the
rear beam, through the sheaves on the
traveller car, down through the eyes-
trap on the rear of the beam and tie a
figure «8» knot in the end.
To Next Page
Loading...
Need help?
General
