27
Trumpet spinnaker kit
1.
Take the spi halyard and
lead it through the pul-
ley and thread as per the
photograph. One end of
the spi halyard must go
through the spreader
bars along the mast.
2.
Connect the spi pole in
the middle of the front
crossbar.
3.
Fix the spi pole bridles to
the bridle plates at the bow of the hull.
4.
Take the spi bag and insert
it in the trumpet as shown
on the picture. Then fix the
whole thing to the pole using
the screws supplied in the
kit.
5.
Attach the spi bag to the pole using the velcro stripes, and attach the rear part of the bag to the cross-
bar using the plastic pad-eye and the spi pole attachment.
To Next Page
Loading...
Need help?
General
