28
6.
Take the loose end of the spi halyard (out of the spreader bars) and fix
it to the spinnaker head. Take the spinnaker tack line at the end of the
spi pole and fix it to the tack point of the spinnaker.
7.
Take the other end of the spinnaker halyard, the one that is along the mast between the spreader
bars. Lead it through the cam cleat that is on the mast, then through the pulley on the crossbar, then
through the pulley on the shock cord near the rear crossbar, then back on the pulley that is on the
trampoline, and lastly in the eyelet that is in front of the trampoline pulley.
Trumpet spinnaker kit
To Next Page
Loading...
