Hobie Tiger - Page 29

29
8.
Lead it then through
the spinnaker bag and
then out to attach it to
the 3 patches on the spi
while hoisting the spi at
the same time. On the
last patch tight a figure
8 knot.
9.
Attach the security line
between the last patch
and the spinnaker head.
10.
To avoid the trumpet mouth to move during the handlings, it must be fixed using a grey spectra line
as shown on the photos. The line must be attached on the pole, then through the trumpet and fixed on
the bridle plate on the hull.
Trumpet spinnaker kit