30
Spi barber
1.
Take the spinnaker sheet. Notice
the spectra line that is in the mid-
dle of the line. Attach this spectra
line to the spinnaker clew point.
2.
Take the grey spectra line supplied with the spinnaker, and fix
the 40 mm carbo block as shown on the pictures below.
3.
Attach the
white spectra
to the dolphin
striker after
you have lead
it through the
trampolin
eyelet.
4.
Take one end of the spinnaker sheet line, lead it through the carbo block near the trampolin, through
the spi block with plastic spring, mounted on the trampolin, back to the carbo block installed on the
self tacker track support. Proceed in the same way on the other side and join the two ends by a knot.
To Next Page
Loading...
Need help?
General
