EasyManua.ls Logo

Hobie Tiger - Cunningham System

Hobie Tiger
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
2. Take the righting line from the rope bag. Attach it to the dolphin striker post under the front crossbar (photo). Pass it
under the trampoline through the grommet at the base of the mast. Fold up the end of the line and stow it in the trampo-
line pocket at the base of the mast.
1.
Attach the cunningham blocks (with the hooks) into the grommet of
the mainsail tack. Take the cunningham line and feed as follows :
(NB : the line must go through the inside of the rotation arm).
Start with the A line and insert it into the cleat, round the single
block and attach the end to one double block supplied with a bowline
knot.
Same thing on the other side with the B line.
take the central line (C). Insert it in the cunningham block on the left
side of the mast and feed it up through the first sheave in the left
pulley from the rear to the front,
take it down in the left sheave at the bottom of the mast from the
front to the rear,
take it back up into the second sheave of the left block from the rear
to the front
take it down in the single block of the bottom of the mast
take it back up in the first sheave of the right hand block from the
rear to the front
take it down in the right sheave at the bottom of the mast from the
rear to the front
take it back up in the second sheave of the right hand block from
front to the rear
and finish in the right cunningham block on the other side of the
mast.
Attach each end of the cunningham line to the shrouds.
A
B
C
Cunningham

Related product manuals