6
Trampoline assembly
5. Find the trampoline rod and insert it into the rear of the
trampoline.
6. Commence lacing the rear of the trampoline. The lacing line starts at the left, rear lacing button on
the rear crossbar. Lace the rear of the trampoline as tightly as possible as per the photographs and
diagrams supplied. Continue across the rear crossbar and tie off securely when finished.
7. Again, take the side tensioning line and very
firmly pull the line in order to tighten the trampo-
line. Repeat this for the opposite side rear corner.
8. Once the sides of the trampoline have been
further tightened, tie off the line and hide the tail
under the trampoline. Repeat this step for the
opposite side rear corner.
NB : It is important that the trampoline be
strongly tightened.
Check the tension on a regular basis.
beginning
To Next Page
Loading...
Need help?
General
