92 Chapter 9: Appendix
Manufacturer’s declaration on electromagnetic
compatibility
LAVI complies with standard DIN EN 60601-1-2:2016-05 and is intended for use in
the electromagnetic environment described in the following. Any deviating ambient
conditions can affect its main performance characteristics (e.g. pressure accuracy or
alarms) or cause the device to fail.
Guidance and manufacturer’s declaration - electromagnetic emissions
The LAVI ventilator is intended for operation in environments as described below. The user
of the LAVI ventilator must ensure it is operated in such an environment.
Emitted interference Compliance Electromagnetic environment - guidance
HF emissions according to
CISPR 11
Group 1
The LAVI ventilator only uses HF energy for
its internal functions. Its HF emissions are thus
very low and interference with nearby elec
-
tronic devices is unlikely.
HF emissions according to
CISPR 11
Class B
The LAVI ventilator is suited for use in all facili-
ties including those connected directly to a pub-
lic supply network that also supplies buildings
used for residential purposes.
Emission of harmonic oscilla-
tions as per IEC 61000-3-2
Class A
Emission of voltage fluc-
tuations/flickers as per IEC
61000-3-3
In compliance
To Next Page
Loading...
