BF15DmBF20D
2)
Measure the resistance between the terminals
This test can be made with the carburetor installed on
the motor.
1
Resistance
15.8
-
24.2
R
I
I
3)
Install a vinyl tube as shown.
4)
At
room temperature, make sure that breath should be
passed through passage.
5)
Connect the
12V
battery positive terminal
to
the
Brown/white terminal and negative
to
BlacWgreen termi-
nal for about five minutes. Then check that breath should
not
be
passed through.
[l]
VlNYi
TUBE
6-8
To Next Page
