Honda BF15D - Ignition Coil

BF15DmBF20D
7. IGNITION COIL
a. REMOVAL
1) Remove the following:
- engine cover (P. 5-1).
- left engine under cover (P. 5-3).
2) Open the wire band clip and free the wires with the spiral
3) Disconnect the spark plug caps from the spark plugs.
4) Disconnect the ignition coil primary wires from the ignition
5) Remove the 6 x 14 mm flange bolts and ignition coil
protector attached.
coil and remove the ignition coil.
bracket
.
\ \
\
121
HIGH TENSION CORD
\ (No. 1 CYLINDER)
HIGH TENSION CORD
(No.
2 CYLINDER)
131
16-27