Honda BF15D - Remote Control Box and Wire Harness Service

BF15DmBF20D
3. CONTROL BOX WIRE HARNESS
a. RE MOVAUl N STALLATI 0 N
1) Remove the engine cover.
121
6P CONNECTOR
RE BAND CLIP
Align the wire tie of the control
box wire harness with the oil
case grommet and clamp the
wire harness securely.
I
161
STARTER CABLE PLATE
ASSEMBLY:
Align the cutout with the pin on the
oil case.
I [6]-1 CUTOUT
I [6]-1 PIN
/
BATTERY CABLE
151
[31
WIRE BAND CLIP
ASSEMBLY:
Align the white tape of the battery cable
with the
oil case grommet.
OIL CASE
GROMMET
[514
151-2
WHITE TAPE
14-4