38
CONTROLS AND FEATURES
<Operating hour notification timing>
<Display>
Steps 1 2 3 4
Outboard
motor
—
Ignition switch
ON
Start engine Gear at F or R
Display Switch ON — — —
Maintenance
indication on
display
Not shown Shown Shown Not shown
Every 100 hours
100 hours
after reset
80 hours
after reset
20
hours
Start of
operation
Notify Notify Notify
NMEA2000-compatible display:
• Follow instructions for the display.
• If the display allows selection of
notification to be preset, select
‘‘Notify’’ (or equivalent).
• Turn on the power supply to the
display before turning on the
ignition switch of the outboard
motor.
• The indication may differ,
depending on the type of display.
31ZZ46240.book Page 38 Tuesday, July 22, 2014 10:00 AM
To Next Page
Loading...
